DB Drive WDX12G1.4 12inch 1000w RMS Subwoofer
R2949.00
12″ WOOFER 4 OHM DVC 1000W / 2000W MAX
Features:
Non-Pressed paper cone
Double stitched foam surround
Dual poly-cotton dampeners
Die-cast aluminum vented basket
Rubber gasket trim ring
Large gauge compression terminals
Protective magnet cove
Specifications:
12” (30.48cm) Woofer
Max Power – 2000 Watts
Nominal Power – 1000 Watts
Dual 4 Ohm Voice Coil
Out of stock
Additional information
| Weight | 15 kg |
|---|---|
| Dimensions | 40 × 40 × 40 cm |
Only logged in customers who have purchased this product may leave a review.
Related Products
Euphoria EWXPW8D4 8inch Subwoofer
EUPHORIA: 8″ WOOFER 200W/500W 4 OHM DVC
Our engineers at DB Drive have designed this subwoofer from the ground up to shake the ground up. The double stitched foam surround along with the die-cast aluminium vented basket allow for maximum excursion while the protective magnet cover gives the woofer a rugged yet stylish appearance.
2″ High-temperature voice coil
120 oz. ceramic ferrite magnet
High-grade Low Carbon steel on top and bottom plate
Designed to optimize SPL performance
High excursion spider designed
1.5″ high roll foam surround
Large gauge push button speaker terminals
Dual 4 ohm voice coils
Digital Designs 606d D2 Subwoofer
The 600 Series is a great entry point for a higher performance system design that keeps the vehicle as close to stock as possible. These subs will perform like a boss on as little as 300-600 Watts, meaning even multiple woofer systems can be driven with one moderate powered amplifier. This keeps electrical upgrades minimal with less added strain on the vehicle. With a high energy, double stack motor paired with a laminated triple layer poly cotton spider suspension the 600 Series works best with vented and multi-order enclosures. The new E revision features an increased motor size, increased top plate thickness, and increased voice coil winding length.
Features
EROM surround
High-temp, 2.5”, voice coil
Triple Layer Deep bass, high excursion spider system
Unique glass fiber and natural pulp cone
Back plate coil gap venting
Extended pole piece
Cast aluminum basket
Digital Designs 610e D2 Subwoofer
The 600 Series is a great entry point for a higher performance system design that keeps the vehicle as close to stock as possible. These subs will perform like a boss on as little as 300-600 Watts, meaning even multiple woofer systems can be driven with one moderate powered amplifier. This keeps electrical upgrades minimal with less added strain on the vehicle. With a high energy, double stack motor paired with a laminated triple layer poly cotton spider suspension the 600 Series works best with vented and multi-order enclosures. The new E revision features an increased motor size, increased top plate thickness, and increased voice coil winding length.
Features
EROM surround
High-temp, 2.5”, voice coil
Triple Layer Deep bass, high excursion spider system
Unique glass fiber and natural pulp cone
Back plate coil gap venting
Extended pole piece
Cast aluminum basket
Vibe Audio CVEN12SW-V4 12inch Subwoofer
Each Cven product is manufactured with material specifically selected for their inherent qualities to perform without any constraint of cost. Our creations are borne in design, innovation and cutting edge technology. Through a combination of engineering expertise and the craftsman’s artistry we have produced high fidelity equipment of the highest calibre and durability.
FEMM MOTOR Finite Method Magnetic designed motor system ensures linear flux saturation and minimal distortion.
PAPER COMPOSITE WOOFER CONE delivers fast, accurate bass with stitching for increased reliability.
ALLOY TORSION BASKET Alloy angular torsion chassis supports the moving parts of the woofer and the huge motor system.
MAGNET BOOT Removable rubber boot for magnet protection.
FEA CONE Designed using Finite Element Analysis to ensure maximum rigidity to weight.
MULTIROLL SURROUND Specially developed foam rubber surround allows better linearity throughout the subwoofer’s excursion range.
SCREW TERMINAL Allows heavy gauge cable to be connected.
Digital Designs 710d D2 Subwoofer
The 700 series is designed for serious performance. It features a DD cast basket supporting a triple stack magnet motor, heavy duty suspension, and a high strength cone coupled to a massive EROM surround, making them best suited for duty in vented or multi-order enclosures.
Features:
EROM surround
High-temp, 3.0”, voice coil
Triple layer Deep bass, high excursion spider system
Unique glass fiber and natural pulp cone
Back plate coil gap venting
Extended pole piece
DD cast basket
710d 712d 715d 718d
Driver Size (In): 10 12 15 18
Watts RMS: 600 – 1200 600 – 1200 600 – 1200 600 – 1200
Peak Power: 3600 3600 3600 3600
VCD (In): 3 3 3 3
Impedance: D2 / D4 D2 / D4 D2 / D4 D2 / D4
Piston Diameter (In): 8 1/2 10 1/4 12 3/4 15 1/2
Fs (Hz): 28.53 28.26 31.63 26.92
Qms: 3.786 4.344 5.485 6.79
Qes: 0.350 0.4823 0.5964 0.567
Qts: 0.321 0.4341 0.5379 0.5233
Vas: 21.42 39.64 70.17 170.4
Xmech (MM): 80 80 80 80
Xmax (MM): 14 14 16 16
Frame OD (In): 10 5/8 12 5/8 15 3/8 18 3/8
Frame OD w/ Gasket (In): 10 3/4 12 7/8 15 9/16 18 1/2
Mounting Diameter (In): 9 5/16 11 3/8 13 7/8 16 5/8
Mounting Depth (In): 7 1/8 8 9/16 9 1/8 10 1/2
Digital Designs 712d D2 Subwoofer
The 700 series is designed for serious performance. It features a DD cast basket supporting a triple stack magnet motor, heavy duty suspension, and a high strength cone coupled to a massive EROM surround, making them best suited for duty in vented or multi-order enclosures.
Features:
EROM surround
High-temp, 3.0”, voice coil
Triple layer Deep bass, high excursion spider system
Unique glass fiber and natural pulp cone
Back plate coil gap venting
Extended pole piece
DD cast basket
710d 712d 715d 718d
Driver Size (In): 10 12 15 18
Watts RMS: 600 – 1200 600 – 1200 600 – 1200 600 – 1200
Peak Power: 3600 3600 3600 3600
VCD (In): 3 3 3 3
Impedance: D2 / D4 D2 / D4 D2 / D4 D2 / D4
Piston Diameter (In): 8 1/2 10 1/4 12 3/4 15 1/2
Fs (Hz): 28.53 28.26 31.63 26.92
Qms: 3.786 4.344 5.485 6.79
Qes: 0.350 0.4823 0.5964 0.567
Qts: 0.321 0.4341 0.5379 0.5233
Vas: 21.42 39.64 70.17 170.4
Xmech (MM): 80 80 80 80
Xmax (MM): 14 14 16 16
Frame OD (In): 10 5/8 12 5/8 15 3/8 18 3/8
Frame OD w/ Gasket (In): 10 3/4 12 7/8 15 9/16 18 1/2
Mounting Diameter (In): 9 5/16 11 3/8 13 7/8 16 5/8
Mounting Depth (In): 7 1/8 8 9/16 9 1/8 10 1/2
Digital Designs 815d D2 Subwoofer
Driver Size (Inches): 15
Watts RMS: 1000 – 3000
Peak Power: 6000
Voice Coil Diameter: 4
Impedance: D1 / D2
Fs (Hz): 31
QMS: 4.723
QES: 0.561
QTS: 0.501
Vas (Liters): 63.1
X-Max (MM): 25
Frame OD w/Gasket (Inches): 395mm – 15-35/64
Mounting Diameter (Inches): 350mm – 13-25/32
Mounting Depth (Inches): 255mm – 10
Motor Diameter (Inches): 236mm – 9-19/64
Motor Depth (Inches): 115mm – 4-17/32
Sealed Enclosure (CuFt): N/A
Ported Enclosure (CuFt):
Features:
Extended Pole Piece with Aluminum Shorting Ring
Hi-Roll Foam EROM Surround
Kevlar Reinforced Nonpress Pulp Cone
4.0″ BASV 4-Layer Flat Aluminium Voice Coil
Quad Layer Deep Bass, High Excursion Spider System
Triple Stack High-Grade Ferrite Magnets, 381oz
Back Plate Voice Coil Gap Venting
Digital Designs 812d D1 Subwoofer
Features:
Extended Pole Piece with Aluminum Shorting Ring
Hi-Roll Foam EROM Surround
Kevlar Reinforced Nonpress Pulp Cone
4.0″ BASV 4-Layer Flat Aluminium Voice Coil
Quad Layer Deep Bass, High Excursion Spider System
Triple Stack High-Grade Ferrite Magnets, 381oz
Back Plate Voice Coil Gap Venting
Driver Size (Inches): 12
Watts RMS: 1000 – 2000
Peak Power: 6000
Voice Coil Diameter: 4
Impedance: D1 / D2
Piston Diameter (Inches): 10
Fs (Hz): 37.68
QMS: 5.218
QES: 0.493
QTS: 0.451
Vas (Liters): 20.841
X-Mech (MM): 80
X-Max (MM): 18
Frame OD w/Gasket (Inches): 12.875
Mounting Depth (Inches): 7.625
Motor Diameter (Inches): 9.5
Woofer Displacement (CuFt): 0.23
Sealed Enclosure (CuFt): N/A
Ported Enclosure (CuFt): 1.75 – 2.75
Shipping Weight: 55.8
Reviews
There are no reviews yet.